Posted on

Painting skirting boards can greatly enhance the overall look of a room, providing a crisp finish that ties together your decor. Follow these step-by-step instructions to achieve a professional result with ease:

  1. Preparation is Key: Begin by preparing the skirting boards. Clean them thoroughly to remove dust, dirt, and any residues using a damp cloth or sponge. Allow them to dry completely before proceeding.
  2. Gather Your Materials: Ensure you have all necessary materials on hand:

High-quality paint suitable for trim e.g., semi-gloss or satin finish

Primer if needed

Paintbrush angled brushes work best for precision

Painter’s tape

Drop cloths or newspaper to protect floors

Sandpaper if required for smoothing rough areas

  1. Protect Surrounding Areas: Use painter’s tape to protect adjacent walls and flooring from accidental paint splatters. Lay down drop cloths or newspaper to safeguard the floor and minimize cleanup.
  2. Apply Primer if necessary: If your skirting boards are unpainted or the existing paint is in poor condition, apply a coat of primer. This helps the paint adhere better and ensures a smoother finish. Allow the primer to dry completely according to the manufacturer’s instructions.
  3. Stir and Pour Paint: Stir the paint thoroughly with a stir stick to ensure an even consistency. Pour a small amount into a paint tray or container suitable for easy access.
  4. Start Painting: Dip your angled brush into the paint, tapping off any excess against the side of the container. Begin painting the skirting boards, starting from one end and working your way to the other. Use long, smooth strokes for an even application.
  5. Paint in Sections: Work in manageable sections, such as one to two feet at a time, to maintain a wet edge and avoid visible brush marks. Blend each section into the next while the paint is still wet.
  6. Check for Drips and Smoothing: Regularly inspect for drips or pooling paint and smooth them out immediately with your brush to prevent uneven drying and finish.
  7. Paint Multiple Coats if Necessary: Depending on the color and condition of your skirting boards, you may need to apply multiple coats for full coverage. Allow each coat to dry completely before applying the next.
  8. Remove Painter’s Tape: Once the paint is dry to the touch, carefully remove the painter’s tape at a 45-degree angle to ensure clean lines.
  9. Touch Up as Needed: After removing the tape, inspect the skirting boards for any missed spots or imperfections. Touch up these areas with a small brush as required.
  10. Allow Paint to Cure: Allow the paint skirting boards to cure fully according to the manufacturer’s instructions before moving furniture back into place or allowing heavy traffic near the skirting boards.